*** SPARE PART*** SIMADYN D PROCESSOR MODULE PM4 32-BIT, GENERAL APPLICATIONS L AND C BUS, 4BI AL.
SIMATIC DP, 100 ELECTR. MODULES FOR ET 200S, 8 DO DC24V/0,5A, 15 MM WIDTH, 100 PIECES PER PACKAGING UNIT
WEIGHING PROCESSOR INTELLIGENT MODULE WITH MEAS. VALUE ACQUISITION AND MEASURED VALUE PROCESSING, WITH SINGLE- COMPONENT BATCHING SCALE FOR APPLICATION IN FOLLOW. SYSTEMS: SIWAREX S; SIMATIC S5 115U, 135U, 155U WIDTH: 1 SLOT
SIMADYN D, SIGNAL PROCESSOR MODULE EP3.1 SPECIAL APPLICATION ONLY
SIMATIC DP, 100 ELECTR. MODULES FOR ET 200S, 8 DI DC 24V, 15 MM WIDTH, 100 PIECES PER PACKAGING UNIT
Control system SIMADYN D SITOR-interface SE20.2, mounted directly for PG16, PG26, PT20G
SIMADYN D, INPUT OUTPUT MODULE EM11 16BIT , 8BO, 4AI, 4AI INT., 2AO PULSE SENSING
SIMADYN D MAILBOX MM3 L- AND C-BUS , EACH 64KB RAM RADIO CLOCK SYSTEM ERROR SIGNAL OUTPUT
*** SPARE PART*** SIMADYN D PROCESS MODULE PM16 GENERAL APPLICATION 16BIT16MHZ L- AND C-BUS , 16BI AL, 16BO
*** SPARE PART*** SIMADYN D I/O SUBMODULE IT41 FOR PM4/PM5/PM6 16 BI, 16 BO, 4 AI, 4 AO, 4 ENCODER INPUTS
SIMADYN D ANALOG OUTPUT MODULE EA12 8AO
Accessory for 3KC8 Electronics module Spare part for 250-3200 A contains 1 unit
CLOSED-LOOP AND CONTROL MODULE MOTION CONTROL 60 MHZ
Interface module N-AS, for 20-M-local bus, redundant systems
SIMATIC C7, I/O module for expanding the C7-633, C7-634, C7-623/P, C7-624/P, C7626/P, C7626/P DP by 16 DI, 16 DO, 4 AI, 4 AO, 4 UI
SIMADYN D MAILBOX MM11 L- AND C-BUS , EACH 64KB RAM
Control Module CUR for infeed and infeed/regenerative feedback units Notice
SIMATIC DP, DIGITAL ELECTRONIC SUBMODULE FOR ET200B W=235MM, 16DO, 120/230V AC,0.5A
SIMADYN D ES1 SPECIAL BOARD VOLTAGE MONITORING RESET, BUSSTATUS
SIMOVERT MASTERDRIVES CLOSED-LOOP AND OPEN-LOOP CONTROL MODULE CU2 SOFTWARE VERSION 1.34
CLOSED-LOOP AND OPEN-LOOP CONTROL MODULE VECTOR CONTROL, CUVC SIMOVERT MASTERDRIVES FIRMWARE VERSION: V3.4
SIMOVERT Master drives Control and Control module CU1 Software Version 1.1
SIMADYN D BINARY INPUT/OUTPUT MODULE EB11 32BI,32BO
MOBY I/ E/ V ASM 420-V24 COMMUNICATATION MODULE FOR CONNECTION TO A PC AND OTHER CONTROL SYSTEMS
accessories circuit breaker 3WL meas. function plus upgradable without voltage transf. measurm. of harmonics & dist.f. for ETU release 2
SIMATIC DP, POWER SUPPLY MODULE AC 120/230V FOR ET200ISP
SIWAREX U WEIGHING ELECTRONICS (TWO-CHANNEL VERSION) FOR CONNNECTING TWO SCALES FOR SIMATIC S7-300 AND ET200M RS232 INTERFACE FOR CONNECT. OF A PC TTY INTERFACE FOR REMOTE DISPLAY CONNECTION WITH BUS CONNECTOR
Control system SIMADYN D Interface module SE49.1, Synchronization module SA60
SIWAREX U WEIGHING ELECTRONICS (SINGLE CHANNEL VERSION) FOR CONNNECTING ONE SCALE FOR SIMATIC S7-300 AND ET200M RS232 INTERFACE FOR CONNECT. OF A PC TTY INTERFACE FOR REMOTE DISPLAY CONNECTION WITH BUS CONNECTOR
SIMATIC DP, interface IM157 for extended temperature range IM157 interface DP/PA link The IM157 and one/several DP/PA coupler(s) form DP/PA Link DPV1.Slave
6AV3 673-1CA31 Control Panel Interface Module
SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=235MM, 32DO, 24V DC, 0.5A
ATC6 expansion module Ethernet Accessory for ATC6300 pluggable contains Ethernet interface
SPE 4 MEMORY EXPANSION MODULE, NOT EQUIPPED MA. 96 K-BYTE CMOS-RAM OR 126 K-BYTE EPROM
SIMATIC DP, ET200M-RED.-BUNDLE CONSISTING OF: 2X IM153-2HF (6ES7153-2BA10-0XB0), 1X BUSMODULE IM/IM (6ES7195-7HD10-0XA0)
SIMATIC DP, FAILSAFE ELECT. SUBMODULE FOR ET200ISP, 4F-AI HART EX I, UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849), FOR CONNECTION OF (HART) 2-WIRE TRANSDUCER
6AV3 672-1CA11 CPI 1 Control Panel Interface
SIMATIC DP, FAILSAFE ELECT. SUBMODULE FOR ET200ISP, 4F-DO 17.4V/40MA EX I, UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849)
SIMATIC DP, INTERFACE MODULE IM152-1 FOR ET200ISP, FOR STANDARD AND REDUNDANT OPERATION
SIWAREX CS WEIGHING ELECTRONIC FOR CONNECTING ONE SCALE. FOR LEGAL TRADE 2000D FOR SIMATIC ET200S-HEAD STATION IM151-1 BASIC/STANDARD/HIGH FEATURE AND IM151-7 CPU. RS232 INTERFACE FOR CONNECTION OF A PC. TTY-INTERFACE FOR REMOTE DISPLAY
GSM alarm module, UN=10-30 V DC, installation width 6MW, overall depth 64 mm, 8 inputs: 0-10 V/24 V DC (0-30 V DC) 4 relay outputs: CO contact, 250V
SIMATIC DP, FAILSAFE ELECT. SUBMODULE FOR ET200ISP, 8F-DI NAMUR EX I, UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849)
residual current device RCD520 Basic RCD type A load side mounted rated resid. current 0.03...5A at 50/60Hz adjustable tv 0...3000ms 4-pole In=250A Ue=100-480V accessory for: 3VA1
residual current device RCD510 Basic RCD type A side mounted rated resid. current 0.03...5A at 50/60Hz adjustable tv 0...3000ms 4-pole In=250A Ue=127-480V accessory for: 3VA1 with terminal connection
SIMATIC DP, ELECTRON. MODULE FOR ET200ECO, 4/8 F-DI PROFISAFE 24V DC, UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849),
